|
|
|
|
 |
 The main body of SZG series double cone roating vacuum dryer is double cone tank, inside tank, it always keeps at vacuum situstion, steam or hot heat water can be passed in jacket which can heat the internal bladder,heat through jackete passd to wet raw material,it’s makes moisture evaporated,low speed electric engine drives tank to rotate, material are moved up to down and actived inside to out
outside hot area are changed instantly, meanwhile, water steam are continually drew out through vacuum pump and vacuum air discharge pipe, this improves the drying speed and achieves aim of average drying, it’s satisfy pharmacy management standard “GMP” . |
 |
 Drying process in vacuum environment,it has high speed under low temperature, compared to normal drying method,drying speed is improved two times,Energy are saved, heating effciency is high,this equipment especially suit for heating sensitive material and easy oxidiated. |
| This equipment has developed design,inside structure is simple,easy clean ,dried material can be discharged totally,operation is easy. |
| Sealed drying,products can not be damaged,no pollution,it’s suit for strong simulative and poisonous material. |
| Material is rotated and mixed to dry,this can make moisture totally dried,keeps good average condition and suit for vavious material’s requirements. |
| Compacted structures,small occupied area,simple operation,labor strength is reduced and saved. |
| Customer can select step-less regulation(1-10r/m) and step regulation (6-10r/m), it’s easy to adjust drying capacity and adopt to different requirement. |
 |
| Example of installation for recommended technology: installation of solvent recover |
|
|
 |
 |
 |
|
Zhajiang HaiXiang Pharmaceutical and Chemical Co.,LTD
JiangXi HaiXi Chemical and Pesticide Co.,LTD |
 |
|
 |
|
|
|
|
|
|
|
|
|
5000 |
volume inside the tank(L) |
|
|
|
|
|
|
|
|
|
5000 |
volume to fill raw material(L) |
|
|
|
|
|
|
|
|
|
≤2500 |
|
|
|
6 |
5 |
4 |
4 |
4 |
|
|
|
|
|
|
|
|
|
|
|
15 |
|
|
|
|
|
|
|
|
|
|
|
4400
×2500 |
|
|
|
|
|
|
|
|
|
|
|
4200 |
design pressure inside the (Mpa) |
|
design pressure inside the tank (Mpa) |
|
|
|
IN THE TANK ≤85 JACKET≤140 |
When use condensator,model and power of vacuum pump(kw) |
|
|
|
|
|
|
|
|
|
JZJX660-4
22kw |
When don’t use condensator,model and power of vacuum pump(kw) |
|
|
|
|
|
|
|
|
|
SK-10
18.5kw |
|
|
|
|
|
|
|
|
|
|
|
8600 | |
Note:For raw material,if its volume has great change before and after dry,then its filling coefficient may be increased or decreased suitably.
REAL EQUIPMENT SAMPLE
|
 |
 |
|
