CT、CT-C Series Hot wind circviating oven-- (Sino-USA)Changzhou Jianda Driers Co.,Ltd.

Hot air circle oven is invented in China. Through our engineers’elaborate design and developments, it has achieved first class standards. This equipment is a box-like shape which can be easily disassembled and fixed; it includes CT series (centrifugal blower) and CT-C series (axial flow blower). The heating source of this machine are steam and electricity, after being heated by heater, hot air is cycled in oven , fresh air is entered from air inlet into oven, the moisture is discharged from moisture exhaust hole, this can increase heating effectiveness and makes raw material water content is reduced gradually. This product equipped low noise, high temperature proof axial flow blower and automatic temperature control system. The whole circulating system is fully sealed, it makes the hot efficiency increased (from traditional oven’s 3%-7% to current 35%-45%), the highest heat efficiency can be reached 70%. The success of this oven’s invention makes Chinese hot air circulating oven meet the advanced level in world, it saves energy and raises the economic benefit. In 1990, Chinese medical management bureau issued the industry standardsas RXH.

The hot air circulating oven is a versatile drying equipment. It is suit for heating , soliding and drying material in pharmacy, chemical, foodstuff, light industry, such as medicine raw material, Chinese traditional medicine, powder,granule, crude drug, packing bottle, pigment, dyestuff, dehydration vegetable, foodstuff, plastic resin, electric component,paper, leather, wool, salt and catalyzer etc.

Hot air is circulated in the oven, heating efficiency is high and the energy is saved.

It uses the forced ventilating function, there are adjustable air distribution plates inside the oven; thus, raw materials can be uniformly dried.

The heating source can be selected from steam, hot water, electricity and far infrared.

Low noise, running balanced; the temperature can be controlled automatically. Installation and maintenance are very easy.

Wide application, it can be applied for drying various materials.

The heating source can be freely selected from steam, hot water, electricity and far infrared.

Machine running temperature range: 50-140˚C for steam (the highest temperature is 150˚C), 50-350˚C for electricity and infrared.

Automatic control system and computer control system are available for selection.

Normal steam pressure is 0.2 – 0.8 Mpa( 2- 8kg/cm²).

Take model CT-C-I hot air circulating oven, for example apply the electric heater, set electric wastage is 15kw, real wastage is 5-8 kw/h, the energy is significantly saved.

Special requirements should be indicated before products booking.

The price for the non-standard should be consulted.

Running temperatures more than 140˚C and less than 60˚C should be indicated while order.

Ovens and baking plates’ size are uniform, it can be exchanged each other. The baking plate dimensions is 460x640x45mm.

SKETCH OF MODEL CT-ⅠOVEN

SKETCH OF MODEL CT-ⅡOVEN

SKETCH OF MODELCT-Ⅲ OVEN

SKETCH OF MODELCT-Ⅳ OVEN

SKETCH OF MODELCT-C-O OVEN

SKETCH OF MODELCT-C-Ⅰ OVEN

SKETCH OF MODELCT-C-Ⅱ OVEN

SKETCH OF MODELCT-C-Ⅲ OVEN

SKETCH OF MODEL CT-C-Ⅳ OVEN

Shaping Baking Cart

Operation temperature:50-400C

Being adopted far infrared quartz tube as heat radiation element ,its heat efficiency is high and its condition is good.

Being adopted the heating between layers,its difference in temperature is small and its time of sterilization is short.

There are 16 pieces of shaped bading pan inside the oven (640*460*45)mm.

Non-standard size can be eferred to the requirements of customers to marde the front door back door.

	Drying capacity for each time (kg)	Power (kw)	Steam to be consumed (kg/h)	Heat radiation area (m²)	Air capacity (m³/h)	Temperature between the top and the(C)	Baking pan	Overall dimension (LxWxH)mm	Eqipped drying trolly
CT-I	120	1.1	20	20	1400	±2	48	2360x1200x2375	2
CT-II	240	1.1	40	40	5200	±2	96	2360x2200x2370	4
CT-III	360	2.2	60	80	9800	±2	144	3300x2200x2560	6
CT-IV	480	2.2	80	100	9800	±2	192	4250x2200x2560	8
CT-C-I	120	0.45	18	20	3450	±2	48	2300x1200x2000	2
CT-C-II	240	0.9	36	40	6900	±2	96	2300x2200x2000	4
CT-C-III	360	1.35	54	80	10350	±2	144	2300x3220x2000	6
CT-C-IV	480	1.8	72	100	13800	±2	192	4460x2200x2290	8

Note:The material will be carbon steel ,aluminum alloy or stainless.The final moisteral (dump)will be less than <1%.

Shanghai zhong tong automotive fitting co.,ltd.
Xian-janssen pharmacy ltd.
Taicang Guanshengyuan food co.,ltd.
England daisheng ceramic(Tianjin) co.,ltd.
ALCERA Inorganic Material(Suzhou) co.,ltd.
Gansu Rare earth group co.,ltd.

The radiators can be used for various drying equipment. There are many specifications and kinds. The materials to be used are aluminium alloy stainless steel,A3 steel surface zinc covering,steel and aluminium compaund,copper,steel pipe and aluminiun winding sheet. Inaddition,the radiators can be used for the heating and dehumidification indoors and in the ware houses.Our factory can carry out the design and manufacturing for our users.